 1 Screenshot of the parts ready to be cut on the computer screen. |
 2 Sheet of 1/4" steel ready to be cut into parts. |
 3 Close up of in action cutting. |
 4 Video showing the CNC Scribe marking the hole locations to be drilled after cutting. |
 5 Video showing the CNC Scribe marking the hole locations to be drilled after cutting. |
 6 Almost done with a sheet of parts. |
 7 Almost done with a sheet of parts. |
 8 First sheet of 1/4" parts cut, time to load another one. |
 9 Showing the swingarm carrier plates and cut quality of 1/4" steel straight off the table and after light cleaning, drilling and tapping with M8 x 1.25. |
 10 Video Showing the swingarm carrier plates and cut quality of 1/4" steel straight off the table and after light cleaning, drilling and tapping with M8 x 1.25. |
 11 A stack of side tubes and 1/4" parts after being cut. |
 12 A 100 or so shock mounting tabs and showing a hole centerpunch done on the table, 1/8" pilot hole and 12mm final hole drilled in 1/4" steel parts. |
 13 Showing a hole centerpunch done on the table, 1/8" pilot hole and 12mm final hole drilled in 1/4" steel parts. |
