 1 Marking hole location with Scribe and then cutting them for drilling out to needed hole size later. |
 2 Banshee Swingarm Bearing Carrier Plates. Marking hole locations with the Scribe for drilling and tapping. Then cutting a curved slot and outside profile from 1/4" steel. |
 3 More of the swingarm carrier plates marking holes to be drilled and tapped after cutting. |
 4 Showing the swingarm carrier plates and cut quality of 1/4" steel straight off the table and after light cleaning, drilling and tapping with M8 x 1.25. |
 5 Showing a hole centerpunch done on the table, 1/8" pilot hole and 12mm final hole drilled in 1/4" steel parts. |
 6 Using the CNC Scribe to layout some hole locations and make some reference marks on some 1/2" Steel plate. |
 7 Video Showing the 1/2" Steel plate parts after being cut with the hole locations marked and ready to be drilled. Also showing cut quality. |
 8 Showing the 1/2" Steel plate parts after being cut with the hole locations marked and ready to be drilled. Also showing cut quality. |
 9 Showing 1/2" Steel parts after some of the holes have been drilled. |
 10 Some 5" x 7" x 1/2" steel plates cut and hole locations marked with the Scribe. |
 11 1/2" steel cut quality on same parts. |
 12 The 5" x 7" x 1/2" steel plates with the hole locations drilled and threaded. |
 13 Closeup of engraving, hole locating and cut quality. |
 14 Degree stop plate for a metal brake. Shows the technical capabilities of the scribe on our table. |
 15 Degree stop plate for a metal brake. Shows the technical capabilities of the scribe on our table. |
 16 Degree stop plate for a metal brake. Shows the technical capabilities of the scribe on our table. |
 17 The CNC Scribe makes nice looking words and designs on aluminum such as these car show trophies. |
 18 Video showing the CNC scribe engraving some car show trophy text and pinstriping before cutting them out. |
 19 The CNC Scribe makes nice looking words and designs on aluminum such as these car show trophies. |
 20 More Aluminum engraved trophies |
 21 More Aluminum engraved trophies |
 22 Aluminum switch plate for a CNC Control Box with Engraving. |
 23 Aluminum switch plate for a CNC Control Box with Engraving. |
 24 Video of the Aluminum switch plate for a CNC Control Box being engraved and cut. |
 25 Aluminum back plate for a CNC Control Box with Engraving and hole locations marked and then drilled. |
 26 Aluminum back plate after giving it a brushed finish. |
 27 Aluminum back plate for a CNC Control Box with Engraving and hole locations marked. |
 28 Another small CNC control box plate being engraved and holes marked for drilling and tapping with 6-32 thread. |
 29 An aluminum fan plate being engraved with a logo and electrical specifications. |
