| Quality USA made Planishing Hammers, Shrinking Discs, and Metalworking tools for an affordable price! |
 |
 |
 |
 |
 |
 |
 |  |  |  |  |
Copyright © 2006 Wolfes Metal Fabrication. All Rights Reserved.
| Welcome to Wolfes Metal Fabrication.com Current tools under development Deep Throat Shrinker & Stretcher It will have a throat depth of 6-8 inches and will be available as a full unit, or in part to allow you to convert a standard unit (1" throat) to a deep throat model if you already own one. Available NOW! 18 1/2" Manual Bead Roller It will have a throat depth of 18 1/2", will include 7 die sets, and a spring loaded adjuster and a crank wheel. If you have any recommendations or features you would like, or would be interested in purchasing a unit when completed please contact us. |
If you restore old cars, build street rods or motorcycles, repair aircraft panels, work with race
cars or any other type of metalwork, the HD22 planishing hammer is a must have tool for
you that will reduce the amount of time you spend working on smoothing a panel, making
domed parts, motorcycle gas tanks, repairing aircraft cowling, custom parts, you name it. It
will also do a better job and is much faster than using a hammer and dolly by hand. This
unit will shape and planish (smooth) metal. Use it to make your own parts, or to straighten
and smooth original sheetmetal panels. Compare to other similar planishing hammer
models prices of $700 - $1500!
cars or any other type of metalwork, the HD22 planishing hammer is a must have tool for
you that will reduce the amount of time you spend working on smoothing a panel, making
domed parts, motorcycle gas tanks, repairing aircraft cowling, custom parts, you name it. It
will also do a better job and is much faster than using a hammer and dolly by hand. This
unit will shape and planish (smooth) metal. Use it to make your own parts, or to straighten
and smooth original sheetmetal panels. Compare to other similar planishing hammer
models prices of $700 - $1500!
- 1 1/2" x 2 1/2" x 3/16" rectangular tubing (the HD model will not flex like
- the smaller tubing planishing hammers)
- 22" throat and 11.25" to bottom tube from die surface
- Adjustable lower die holder
- Includes a 4 bottom die set (Flat, 6", 4" and 2")
- More dies are available
- Dies are 4140 tool steel hardened to 56 Rockwell C scale
- Capacity of 16 gauge steel and 1/8" aluminum
- Air motor has speed control up to 4500 bpm
- 4cfm @ 90 psi min.
- Quality foot pedal and hose for speed control and on/off
- Durable finish
- Free earplugs with a planishing hammer purchase!
- Satisfaction Guarantee or your money back!
- Lifetime warranty on frame and dies, One year on motor
| Here is a little information on a few of our regular sellers! View prices and more information under the Products link! |
| HD22 Planishing Hammer |
These shrinking discs work on steel or aluminum, and the secret to them is they create heat
through friction while touching the metal, and when the area is cooled with either soapy
water or a blower nozzle the heated area shrinks! It is the same concept as using a torch or
stud gun with a solid tip to heat, and a wet rag to cool, but the heat is much more controlled
and only touches the high stretched spots that need to be shrunk. So you are able to shrink
an area on a panel without worrying about making the problem even worse like you can with
a torch. The shrinking disc also works excellent on removing those "oil can" dents that you
have overworked and stretched the metal too much!
Once you have started using the shrinking disc and get a little practice under your belt, it will
make you feel more confident in your metalworking skills when you can finish a panel with no
body filler at all! The more you use it, and the better you get, the less filler you have to
spread and sand! It saves lots of time on sanding, keeps the shop cleaner from having less
putty dust, and makes for a better quality, longer lasting finish with little or no body filler at
all!
In normal conditions, you would tap the dents and low areas up with a hammer and dolly,
make a pass with the shrinking disc, and tap up any remaining low spots before making
another pass. After a few passes your panel with be smooth, and back to normal surface
tension.
The shrinking disc comes with detailed instructions on how to use it.
through friction while touching the metal, and when the area is cooled with either soapy
water or a blower nozzle the heated area shrinks! It is the same concept as using a torch or
stud gun with a solid tip to heat, and a wet rag to cool, but the heat is much more controlled
and only touches the high stretched spots that need to be shrunk. So you are able to shrink
an area on a panel without worrying about making the problem even worse like you can with
a torch. The shrinking disc also works excellent on removing those "oil can" dents that you
have overworked and stretched the metal too much!
Once you have started using the shrinking disc and get a little practice under your belt, it will
make you feel more confident in your metalworking skills when you can finish a panel with no
body filler at all! The more you use it, and the better you get, the less filler you have to
spread and sand! It saves lots of time on sanding, keeps the shop cleaner from having less
putty dust, and makes for a better quality, longer lasting finish with little or no body filler at
all!
In normal conditions, you would tap the dents and low areas up with a hammer and dolly,
make a pass with the shrinking disc, and tap up any remaining low spots before making
another pass. After a few passes your panel with be smooth, and back to normal surface
tension.
The shrinking disc comes with detailed instructions on how to use it.
- Fits standard 7" or 9" sander/grinder/polishers
- .060 high grade stainless steel with safety edge
- Work on steel or aluminum
- Creates Heat through Friction to allow shrinking of the sheetmetal
- Relieves surface tension created from damage
| SD9 Shrinking Disc |
| We do ship internationally! Please contact us for shipping prices! sales@wolfesmetalfabrication.com |
| We specialize in producing sheet metal fabrication tools, that are used in the automotive industry, motorcycle or chopper building, aircraft repair and many other businesses and hobbies that involve custom metalworking or metalshaping! |
<~ New items available
| Be sure to check back periodically, we are adding more products, and we will have special prices on items now and then. |
| Announcements We would like to expand the number of dealers that are offering our Shrinking Discs. Please contact us if interested. We would like to add some more Testimonials to our site. Get your name, project and your thoughts added to our site by sending in a Testimonial. |
|
|
|
|
|
|
